|
Brand: Rcharlance
Iten No.: X218
Iten Name: FlyShark
Wheelbase: 218mm
Arm Plate Thickness: 4mm
Bottom Plate Thickness: 4mm
Side Plate Thickness: 3mm
Material: Carbon Fiber
Color: Black
F4 PRO+ V2 Flight Controller
F4 (STM32F405) Processor
Gyroscope: MPU6000(Reserved external gyroscope interface)
Firmware: Beta flight OMNIBUS F4SD
Input Voltage: 2-6s lipo support
BEC Output: 5V 3A
Firmware: betaflihgt_3.2.0_OMNIBUSF4SD
Net Weight: 12g (not including cable)
Size: 36x36mm
Mounting Hole: 30.5x30.5mm
Receiver: Support PPM, SBUS, IBUS, DSM2/ DSMX Receiver (UART1)
Integrated with OSD, support BF Ground Station adjust OSD
Adjust the PID by OSD via remote control
Dshot support
Support SAMRT AUDIO, adjust the VTX by OSD (UART3)
MicroSD card blackbox
Baro(BMP280)
VTX
Frequency: 5362-5945MHZ
Video Format: NTSC/PAL
Transmitting Power: 25/200/600/800mW switchable
Operating Voltage: DC 7V-24V
Output voltage: 5V /450mA
Working Current: 25mW: 240mA/ 200mW: 340mA/ 600mW: 520mA/ 800mW: 600mA
RemoteSoftwareprotocol: SmartAudio V2.0
Audio Bandwidth: 6.5MHZ
Video Bandwidth: 18MHZ
Channel: 40CH
Range: Up to 4km omnidirectional RHCP antennas
Connector: MMCX
Supports smart audio (remote parameter adjustment)
40A 2-6S Blheli-32 4 in 1 ESC
Input Voltage: 2-6S Lipo battery
Constant Current: 40A
Peak Current: 50A
BEC Ouput: NO
Mounting hole spacing: 30.5mm
40A continuous current, 50A burst
32bit compatible ESC (Blheli_32)
Dshot1200 up to 32kHz
Incredibly small size
Very low weight
Auto timing feature
Build in current sensor
Smooth response
Compatible to Betaflight F3/F4 flight controller Support Damped Mode, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200 forward and reverse.
Rcharlance FPV CAMERA
CCD: 1/3” Sony SUPER HAD II CCD
Horizontal resolution: 800TVL
TV system: PAL / NTSC
5D-OSD button: yes
Input voltage: 12V DCDimensions(mm): 25X25(W*L)
Menu (OSD): English menu
White Dot Repair: Support
Image Adjustment: Support
Weight: 14.6g(with bracket)
Power Consumption: 70mA
Rcharlance DT2306-2400KV Motor
KV: 2400KV
Battery (Lipo): 2-4S
Spindle diameter: 23mm
Spindle length: 6mm
Out shaft diameter: 5mm
Motor size: Φ33.5 × 39.1mm
Thrust: 2600g (16V 5048 3-blade prop)
Programmable RGB LED Lights
These 4PCS Programmable RGB LED lights can fit pretty much in any frame we can find currently
They are programmable via the Betaflight LED configurator
The betaflight firmware designers added so many interesting features so you can now get alarms when your battery is discharged
Simple and easy to install, this featherweight light set will provide super bright lights for your multirotor
Weight: 3.38g
Material: PCB
Dimensions: 6x 45mm
Fit for most FPV quadcopter frames with slim arms
Frsky XM+ Receiver (BNF version only)
Dimension: 21.5*12*3.5mm(L x W x H)
Weight: 1.6g
Number of channels: up to 16CH from SBUS (1-15ch for PWM,16ch RSSI for FC)
Operating voltage range: 3.7~10V
Operating current: 30mA @5V
Operating range: full range
With RSSI output on board: analog 0-3.3V
Firmware upgradeable
Compatibility: FrSky D16 mode
|
