- Shipping Company Estimated Delivery Time Shipping Cost
Highlights
DSSS&FHSS act perfect on anti interference, especially on 433 and graph transmission.
Output SBUS, PPM and PWM signals simultaneously.
Top speed response, 3ms for all channels parallel.
Top precision 4096, 0.25us every bit insure every servo stable.
Sub miniature size, totally weights 3.4 grams, never burden to your drones, best choice for light drones.
All channels response parallel, totally 3ms.
Specially used for light drones, compatible with all flight controllers such as DJI NAZA, ZERO TECH, PIX, APM, MINI APM, NAZE32, and CC3D.
One single cable connect with the flight controller, easy setting.
The R6DS a small 6 channel S.BUS / PPM / PWM ready receiver from Radiolink with three signal output. The R6DS can output both PWM and S.BUS output simultaneously.
All channels have a response time of 3 ms. Specially designed for light drones, and compatible with all flight controllers such as DJI NAZA, ZERO TECH, PIX, APM, MINI APM, NAZE32, and CC3D etc. All it takes is one single cable connected to your flight controller and you're good to go. And with its miniature size and a total weight of 3.9 grams, the R9D will never be cumbersome on your drones.
Specification
General | Type: Receiver Model: Radiolink R6DS Quantity: 1 Piece Band: 2.4G Channel: 6 (Red LED indicator is for PWM mode. Blue LED for PPM, can be extended to 10channels) Power Input: MAX 6V Control Distance: 600m in air Current Consumption: 38-45mA (Input voltage:5V) Precision: 4096 PWM output: 6 channels totally. PPM output: CH1 outputs PPM signal for 10 channels, and channel 2 to channel 6 output independent PWM signal simultaneously. Compatible: AT9 AT10 Transmitter |
Receiver Operation | SBUS/PPM and PWM signal change Short press the ID SET switch two times within 1 second, the signal is changed from normal PWM to SBUS/PPM. The red LED indicates the normal PWM and blue/purple indicates SBUS/PPM. |
Installment of receiver antenna |
The antenna must be kept as straight as possible. Otherwise it will reduce the effective range. Large model aircraft may of some metal part interfering signal; in this case the antennas should be placed at both sides of the model. Then the best RF signal condition is obtained at any flying attitude. |
Dimensions&Weight | Dimension: 25×16×11mm Weight: 3.9g |
Package Contents |
Customer Photos
Customer Videos
Customer Reviews
5 star | 0 | |
4 star | 0 | |
3 star | 0 | |
2 star | 0 | |
1 star | 0 |
- All (0)
- Images (0)
- Videos (0)