Ship to:
United States
Select the desired shipping method
- Shipping Company Estimated Delivery Time Shipping Cost
Highlights
3 x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
6 x PWM / DShot outputs without conflict
2 x 2812LED outputs option
5 x UARTs
1 x Group of 5V/G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
4 x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
1 x pair I2C1 pads
1 x Side-press button for BOOT(DFU) mode
1 x 16pin bottom mounted FFC Slot for FCHUB-6S, FCHUB-VTX or FCHUB-W connection
Specification
| General | Brand: Matek System Item No.: F405-STD MCU: 168MHz STM32F405RGT6 IMU: 32K ICM20602 gyro/accelerometer (SPI) Baro: BMP280 (I2C) OSD: BetaFlight OSD w/ AT7456E chip Blackbox: MicroSD card slot (SD/SDHC) VCP, UART1, UART2, UART3, UART4, UART5 Built in inverter for SBUS input (UART2-RX) PPM/UART Shared: UART2-RX SoftSerial on TX2, S5 or S6 optional Camera control on S6 or DAC optional Smartaudio & Tramp VTX protocol supported Battery Voltage Sensor: 1:10 Current Sensor: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option) BEC 5V: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option) LDO 3.3V: Max.300mA I2C1 SDA & SCL: Yes WS2812 Led Strip : Yes Beeper : Yes RSSI: Yes 36x36mm PCB with 30.5mm mounting holes |
| Package Contents | 1 x Flight Controller 2 x 0.5mm*16Pin 5cm Flexible Flat Cable 4 x M3 Anti-vibration Standoffs |
Customer Photos
Customer Videos
Customer Reviews
| 5 star | 0 | |
| 4 star | 0 | |
| 3 star | 0 | |
| 2 star | 0 | |
| 1 star | 0 |
Write A Review
- All (0)
- Images (0)
- Videos (0)
