General |
Brand: Holybro
Item Name: Kopis 2
Product Size: 23.4 x 20.4 x 4.6cm
Product Weight: 299g
Arm Plate Thickness: 5mm
Bottom Plate Thickness: 4mm
Motor: T-Motor F40 Pro2 2400KV
Propeller: Dalprop T5046C
Camera: RunCam Micro Swift
Receiver: Frsky XSR
Package Size: 33.5 x 29 x 6.7cm
Package Weight: 0.989kg
Kakute F7 Flight Controller
MCU: STM32F745 32-bit processor
IMU: ICM20689 (SPI)
Barometer: BMP280
Current Sensor: Approximately 130 amps maximum measurable value
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
6 hardware UARTS (UART1,2,3,4,6,7)
All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without "uninvert hack"
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported
TF card for Blackbox logging
Mounting Holes: Standard 30.5mm square to center of holes
Tekko 32 BLHeli_32 4 In 1 Dshot1200 ESC
Supports 3-6S lipo input
35A continuous current, 50A burst
Mounting holes 30.5x30.5mm
Size: 55*40*6.4mm
Weight: 17g
32bit ESC with BLHELI32 firmware
4PWM input
Voltage output (VBAT), ESC Telemetry(TELEM)
Supports Oneshot / Multishot / Dshot PWM
Supports damped light
NO BEC
5.8G 40CH VTX
Output Power: 0.5mW (pit mode), 25mW, 200mW, 500mW, 800mW
Audio: 6.5 MHz Mono
Antenna Connector: MMCX
Input Voltage: 7 to 28 volts (2-6S LiPo) with absolute maximum 42 volts
Dimensions: 35x25x7mm (Includes USB height)
Mounting Holes: Standard 30.5mm square to center of holes
Weight: 9.3g
|