- Shipping Company Estimated Delivery Time Shipping Cost
Highlights
- CW/CCW/short brake/stop motor control modes.
- Built-in thermal shutdown circuit and low voltage detecting circuit.
- All pins broken out to 2.54mm spaced pins, and it can be plugged onto the breadboard.
- Filtering capacitors on both supply lines.
- Great for DIY and smart car projects.
- The motor driver can control up to two DC motors at a constant current of 600mA (1.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 5kHz. The motor and the external power supply interfaces use the XH2.54-2P socket instead of the traditional green screw terminal, easy to use, and you can avoid screwing.
Specification
General | |
---|---|
Type | Motor Driver Module |
Driver Chip | L293DD |
Power supply voltage | VM=30V max |
Logic voltage | VCC=4.5-30V |
Output current | Iout=0.6A(average) / 1.2A (peak) |
Input connector | Pin headers with 2.54mm pitch |
Output connector | XH2.54-2P socket |
Compatible | Arduino |
Note | However, when using the board at currents up to 0.6A, it may be necessary to improve thermal performance with a heat-sink. |
Package Contents | |
1 x module |
Customer Photos
Customer Videos
Customer Reviews
5 star | 0 | |
4 star | 0 | |
3 star | 0 | |
2 star | 0 | |
1 star | 0 |
- All (0)
- Images (0)
- Videos (0)